Main page
OID Repository
https://oid-base.com
Display OID:

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 637 asd(61) asam(1) xdslMIB(39) xdslTest(7) xdslXtucSeltDataTable(4) xdslXtucSeltDataEntry(1) xdslSeltSelectedPsdTypeUsed(11)}

xdslSeltSelectedPsdTypeUsed(11)

 
 

OID description



   
OID: (ASN.1 notation)
(dot notation)
(OID-IRI notation)

Description:

xdslSeltSelectedPsdTypeUsed OBJECT-TYPE
SYNTAX SeltSelectedPsdType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reports the actual Psd type that was used during the last
SELT Echo measurement.
The possible values are:
- selectedPsdTypeConfigVdsl2 (1): The VDSL2 modem line configuration
data was used to limit the SELT excitation signal.
- selectedPsdTypeConfigVdsl1 (2): The VDSL1 modem line configuration
data was used to limit the SELT excitation signal.
- selectedPsdTypeConfigAdsl1or2 (3): The ADSL2 or ADSL1 modem line
configuration data was used to limit the SELT excitation signal.
- selectedPsdTypeConfigAdsl2Plus (4): The ADSL2+ modem line
configuration data was used to limit the SELT excitation signal.
- selectedPsdTypeConfigReAdsl2 (5): The READSL2+ modem line
configuration data was used to limit the SELT excitation signal
- selectedPsdTypePreDefVdsl2 (6): The predefined VDSL2 profile was
used to construct the SELT excitation signal.
- selectedPsdTypePreDefVdsl1 (7): The predefined VDSL1 profile was
used to construct the SELT excitation signal.
- selectedPsdTypePreDefAllBandsVdsl2 (8): The predefined all bands
VDSL2 profile was used to construct the SELT excitation signal.
- selectedPsdTypePreDefAllBandsAdsl1 (9): The predefined all
bands ADSL1 profile was used to construct the SELT excitation
signal.
- selectedPsdTypePreDefAllBandsAdsl2Plus (10): The predefined all
bands ADSL2+ profile was used to construct the SELT excitation
signal.
- selectedPsdTypePreDefVdsl2RegionA (11): The predefined VDSL2 profile
consistent with Annex A of G.993.2 was used to construct the SELT
excitation signal.
- selectedPsdType8dConfigVdsl2 (12): The VDSL2 profile 8d and VDSL2 modem
line configuration data was used to construct the SELT excitation signal.
- selectedPsdTypeUnknownNotSupported (255): parameter is not available.
This value is only valid when the measurement is in the
state 'success'.
ALCATEL NOTE:
ACCESS: NA USAGE: NA
PERSIST: NA INSRVMOD: NA
RANGE: NA DEFVALUE: NA
UNITS: NA SPARSE: NA
DESCR: NA"


 
 
Short link:


Parent OID: xdslXtucSeltDataEntry(1) First sibling OID: xdslSeltNoise(1) Previous sibling OID: xdslSeltQLNoiseMeasTimeUsed(10) Next sibling OID: xdslSeltUncalEchoMinSnrUsed(12) Last sibling OID: xdslSeltCarrierSpacingUsed(15)