|
|
Description:
|
heRFSwitchState OBJECT-TYPE
SYNTAX INTEGER {pathA(1), pathB(2), cross(3), bar(4), bothA(5), bothB(6)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reports the state of the RF Switch. Not all enumerations
must be supported. For example, an A-B RF switch may
support only the pathA and pathB enumerations while a
cross-bar switch may support cross, bar, bothA or bothB or
only cross and bar but not pathA and pathB enumerations.
A value pathA(1) indicates that the switch output is being
fed by side A (first input) of the switch. This enumeration
is intended for use by an A-B switch.
A value pathB(2) indicates that the switch output is being
fed by side B (second input) of the switch. This enumeration
is intended for use by an A-B switch.
A value cross(3) indicates that the switch outputs are fed as
follows:
Side A (first or primary) output is connected to side B
(second or alternate) input.
Side B (second or alternate) output is connected to side A
(first or primary) input.
This enumeration is intended for use by a cross-bar switch.
A value bar(4) indicates that the switch outputs are fed as
follows:
Side A (first or primary) output is connected to side A
(first or primary) input.
Side B (second or alternate) output is connected to side B
(second or alternate) input.
This enumeration is intended for use by a cross-bar switch.
A value bothA(5) indicates that the switch outputs are fed as
follows:
Side A (first or primary) output is connected to side A
(first or primary) input.
Side B (second or alternate) output is connected to side A
(first or primary) input.
This enumeration is intended for use by a cross-bar switch.
A value bothB(6) indicates that the switch outputs are fed as
follows:
Side A (first or primary) output is connected to side B
(second or alternate) input.
Side B (second or alternate) output is connected to side B
(second or alternate) input.
This enumeration is intended for use by a cross-bar switch."
|
|
|
|
