|
|
|
|
Description:
|
heRFSwitchMIB MODULE-IDENTITY
LAST-UPDATED "200310090000Z" -- Oct 9, 2003
ORGANIZATION "SCTE HMS Working Group"
CONTACT-INFO
"SCTE HMS Subcommittee, Chairman
mailto: standards@SCTE.org"
DESCRIPTION
"The MIB module for the HMS HE RF Switch module
entities.
This MIB module is for representing RF
switch equipment present in the headend (or indoor)
and is supported by a SNMP agent.
This MIB is limited in its scope and intended to
describe an A-B (2 input and 1 output) or a crossbar
RF switch. Up to 2 RF inputs and 2 outputs
are supported. Any devices with more than 2 RF
inputs or outputs shall be covered by another MIB.
This MIB does not intend to dictate all of the nuances
involved in changing control settings (automatic or
manual mode, changing switch controls in each possible
mode combination). The most common desired behaviors
are noted but specific switch operation and behavior
are left to the RF switch vendors.
Not all control enumerations must be supported. This
is noted in the variables that have optional
enumerations.
Refer to the associated notes for information on what
SNMP responses should be returned for unsupported
enumerations."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |
