|
|
Description:
|
docsQosParamSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsQosParamSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the set of DOCSIS 1.1 QOS
parameters defined in a managed device.
The ifIndex index specifies a DOCSIS MAC Domain.
The docsQosServiceFlowId index specifies a particular
Service Flow.
The docsQosParamSetType index indicates whether
the active, admitted, or provisioned QOS Parameter
Set is being described by the row.
Only the QOS Parameter Sets of Docsis 1.1 service
flows are represented in this table. Docsis 1.0
QOS service profiles are not represented in this
table.
Each row corresponds to a DOCSIS QOS Parameter Set
as signaled via DOCSIS MAC management messages.
Each object in the row corresponds to one or
part of one DOCSIS 1.1 Service Flow Encoding.
The docsQosParamSetBitMap object in the row indicates
which particular parameters were signaled in
the original registration or dynamic service
request message that created the QOS Parameter Set.
In many cases, even if a QOS Parameter Set parameter
was not signaled, the DOCSIS specification calls
INTERNET-DRAFT<draft-ietf-ipcdn-qos-mib-06.txt>November 2001
for a default value to be used. That default value
is reported as the value of the corresponding object
in this row.
Many objects are not applicable depending on
the service flow direction or upstream scheduling
type. The object value reported in this case
is specified in the DESCRIPTION clause."
|
|
|
|
|
|
iso(1)
docsQosParamSetEntry(2) 
