|
|
Description:
|
gpsMode OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode of the GPS receiver defined as follows:
======================================================
Receiver Mode: Survey.
The receiver is surveying and averaging its position.
When it has finished surveying, the receiver switches
to Position Hold mode. Survey mode and Position Hold
mode are appropriate for static applications, such as a
typical server room environment. This is the default mode
when the SyncServer starts.
Receiver Mode: Dynamic.
The GPS receiver surveys continuously to determine its
position and doesn't switch to another mode. This mode
must be initiated by a user, and is appropriate for mobile
applications such as ships, land vehicles, and aircraft.
The degree of accuracy this mode offers is fine for NTP
time over networks, but is less than optimal for the IRIG-B,
1 PPS, 10 MHz outputs available on some SyncServer models.
Receiver Mode: Hold.
The GPS receiver has completed Survey mode and switched to
this mode, or the user has manually entered a position and
forced it into this mode. The accuracy and stability of the
SyncServer's timing outputs are optimal when the receiver
has its exact position and is in this mode.
======================================================"
|
|
|
|
