|
|
Description:
|
cHsrpGrpPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The cHsrpGrpPriority helps to select the active and the
standby routers. The router with the highest priority is
selected as the active router. In the priority range of 0
to 255, 0 is the lowest priority and 255 is the highest
priority.
If two (or more) routers in a group have the same priority,
the one with the highest ip address of the interface is the
active router. When the active router fails to send a Hello
message within a configurable period of time, the standby
router with the highest priority becomes the active
router.
A router with highest priority will only attempt to
overthrow a lower priority active router if it is
configured to preempt. But, if there is more than one
router which is not active, the highest priority non-active
router becomes the standby router."
DEFVAL { 100 }
|
|
|
|
|
|