Main page
OID Repository
https://oid-base.com
Display OID:

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 9 ciscoExperiment(10) cisco6200MIB(26) cisco6200MibObjects(1) c62OCInterface(3) oCInterfaceTable(1) oCInterfaceEntry(1) oCILoopMode(14)}

oCILoopMode(14)

 
 

OID description



 
OID: (ASN.1 notation)
(dot notation)
(OID-IRI notation)

Description:

oCILoopMode OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter puts the optical interface of C6200 system in
facility (far end) loopback mode. It causes the node to loop all
the traffic received on the optical interface back to the
network. It does not generate any traffic or perform any kind of
testing locally. This mode affects services to all the users
connected through the node, so this facility must be used with
care. User must set it back to disable mode once the testing
completes. System will stay in loopback mode, if enabled, until
the user disables the loop mode through NMS Manager or the
system terminates - in which case loop mode is disabled
automatically.
It is only meaningful when the out of band management channel is
used for management. It may not be useful when the in-band
management channel is used for management traffic, as it causes
breakdown in the management communications channel.
The alarm level of the port is set to unknown while loopback
mode is enabled."



Classification:

MIB object for network management

 
See classes of OIDs

Note to implementers:




 
 
Short link:


Parent OID: oCInterfaceEntry(1) First sibling OID: oCIAlarmLevel(2) Previous sibling OID: oCILOCD(13)