|
|
Description:
|
geConfSpeed OBJECT-TYPE
SYNTAX INTEGER {speed-auto(1), speed-1G-full(2), speed-2500M-full(3), speed-10G-full(4), speed-100M-full(5), speed-100M-half(6)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures speed of gigabit uplink interface
speed-auto(1): the system configures uplink speed according to plugged-in transceiver module,
if a 1Gbps only transceiver detected then interface speed 1Gbps is configured
if a 10Gbps only transceiver detected then interface speed 10Gbps is configured
speed-1G-full(2): the system configures interface speed to 1Gbps and full duplex once a dual speed transceiver SFP+
module plugged in, otherwise configure it according to transceiver's speed.
speed-2500M-full(3):the system configures interface speed to 2.5Gbps and full duplex once a dual speed transceiver SFP+
module plugged in, otherwise configure it according to transceiver's speed.
speed-10G-full(4): the system configures interface speed to 10Gbps and full duplex once a dual speed transceiver SFP+
module plugged in, otherwise configure it according to transceiver's speed.
speed-100M-full(5): for GLC card interface only and not for gigabit uplink interface
speed-100M-half(6): for GLC card interface only and not for gigabit uplink interface
Default: speed-auto(1)
Reference: SFF-8472 Rev 11.0 (ftp://ftp.seagate.com/sff)"
-- ::= {geConfEntry 1} reserved for T780
-- ::= {geConfEntry 2} reserved for T780
-- ::= {geConfEntry 3} reserved for T780
-- ::= {geConfEntry 4} reserved for T780
|
|
|
|
