|
|
|
|
Description:
|
fclX25CfaFacOutputMarkers OBJECT-TYPE
SYNTAX INTEGER {
noCheck(1),
check(2),
remove(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object specifies the behaviour
of the equipment with respect to the outgoing
facility markers. The authorized values are :
noCheck : no checking,
remove : the markers are not transmitted,
check : according to the following table :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| packet | facility marker |
| |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | 0000 (1) | 00FF (2) | 000F (3) |
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| call |no checking |clearing (5)|no checking|
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| call | | | |
|connected|clearing (4)|no checking |no checking|
|~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~~|~~~~~~~~~~~|
| clear | - | - |no checking|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(1) : registration codes,
non-x25 facilities provided by the
network in case of intranetwork calls,
non-x25 facilities provided by the
network to which the calling DTE is
connected in case of internetwork
calls
(2) : non-x25 facilities provided by the
network to which the calling DTE is
connected in case of intranetwork
calls
(3) : CCITT-specified DTE facilities
(4) : diagnostic to local equipment = 03 42,
diagnostic to remote equipment = 11 42
(5) : diagnostic to local equipment = 03 42
The default value is 'noCheck'."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |
