|
|
Description:
|
tlpAgentConfigRemoteRegistration OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Registers an SNMP contact's IP address and the port on which
the contact is listening for SNMP traps. Setting this
value is used to CREATE a table entry in a non-standard way.
Getting this value will return a string INADDR_ANY and any
port number.
The port number should always be included. When unregistering
an SNMP contact, the requester's IP address should be provided
with a port number of 0. When setting or unsetting this OID,
the IP address string should never be 0 nor should it be empty.
The registration uses its default community string to register
each contact. To use a community other than the default, then
it must be appended to the end of the string delimited with a
comma.
The address should be of the format 0.0.0.0:00000 for IPv4.
If IPv6 is supported, use the bracket-enclosed format given
in IETF RFC 2732 Section 2, with the following examples:
[FEDC:BA98:7654:3210:FEDC:BA98:7654:3210]:80
[1080:0:0:0:8:800:200C:417A]:162
[3ffe:2a00:100:7031::1]:162
[1080::8:800:200C:417A]:162,myCommunity
[::192.9.5.5]:162,myCommunity
[::FFFF:129.144.52.38]:80
[2010:836B:4179::836B:4179]:162"
|
|
