|
|
Description:
|
trRouting OBJECT-TYPE
SYNTAX INTEGER {
off(1),
all-None(2),
single-All(3),
single-None(4)
}
ACCESS read-write
STATUS optional
DESCRIPTION
"Set this variable to change the source routing
configuration on the device.
Off: No source routing.
All, None: All-routes broadcast, nonbroadcast return.
The frame will be transmitted on every route within
the network resulting in multiple copies on a given ring.
Single, All: Single-route broadcast, all routes
broadcast return. The frame will be transmitted across
the designated bridges, which will result in the frame
appearing only once on each ring. The response frame
is on all routes broadcast to the originator.
Single, None: Single-route broadcast, nonbroadcast
return. The frame will be transmitted across designated
bridges, which will result in the frame appearing only
once each ring.
In order for changes to this variable to take effect,
the device must be reset. See cmdReset to do this."
|
|
|
|
