|
|
|
|
Description:
|
vRtrLdpNgIfParamIPv4TransAddrTyp OBJECT-TYPE
SYNTAX INTEGER {interface(1), system(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of vRtrLdpNgIfParamIPv4TransAddrTyp specifies the source
of the transport address to be used when setting up the LDP TCP
sessions. The transport address can be configured globally
(applied to all interfaces) or per interface.
When the value of this object is 'interface', the interface's IP
address is used to setup the LDP session between neighbors. If
multiple interfaces exist between two neighbors, the 'interface' mode
cannot be used since only one LDP session is actually set up between
the two neighbors.
When the value of this object is 'system', the system's IP address is
used to set up the LDP session between neighbors.
This value is only applicable to LDP IPv4 interfaces."
DEFVAL {system}
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2025 |
iso(1)
