|
|
|
|
Description:
|
tmnxMcLagConfigLagSystemId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of tmnxMcLagConfigLagSystemId specifies the system-id to be
used in the context of mc-lag operation. The partner system will
consider all ports using the same system-id, system priority and
lacp-key as part of the same lag.
In order to achieve this in mc-lag operation, both systems have to be
configured with the same values.
As long as the system does not have the connection with its redundant
peer, it will use the locally defined value (chassis MAC address).
After detecting a redundant node failure, the previously active system
will keep on using the system-id configured here, while the standby
system will switch to its locally defined value.
The value of this object must be all zeroes when the value of
tLagStandbySignaling of the corresponding LAG is 'powerOff (2)'.
The value of this object cannot be all zeroes when the value of
tLagStandbySignaling of the corresponding LAG is 'lacp (1)'."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2025 |
