|
|
|
|
Description:
|
tmnxOamVccvTrTgFec128CtlEntry OBJECT-TYPE
SYNTAX TmnxOamVccvTrTgFec128CtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tmnxOamVccvTrTgFec128CtlEntry contains the target information for a
VCCV trace route test which switches to a downstream FEC 128 segment.
The values in a row are used to fill a 'FEC 128 Pseudowire' sub-TLV
(Type, Length, Value) within the 'Target FEC Stack' TLV within the
launched VCCV trace route request.
A row is created when the test's tmnxOamVccvTrCtlSwitTgtFecType is set
to 'fec128(2)'.
A row is destroyed when the tmnxOamVccvTrCtlTable row is destroyed.
All the objects in a row must be set in one SNMP Set PDU. Otherwise,
the SNMP Set PDU will be rejected."
REFERENCE
"RFC 4379, 'Detecting Multi-Protocol Label Switched (MPLS) Data Plane
Failures', Section 3.2.9 ('FEC 128 Pseudowire (Current)')."
INDEX {tmnxOamTrCtlOwnerIndex, tmnxOamTrCtlTestIndex}
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |
