|
|
Description:
|
alaNtpAccessRestrictedRestrictions OBJECT-TYPE
SYNTAX INTEGER ( 0 .. 1023 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A mask indicating the restrictions to apply
to the entry.
0x0001 - ignore, Ignore all packets from hosts.
Can't use this on default (0.0.0.0).
0x0002 - noserve, Ignore NTP packets other than
information queries and config-uration requests.
0x0004 - notrust, Treat these hosts normally in other
respects, but never use them as synchronization sources.
0x0008 - noquery, Ignore all NTP information
queries and configuration requests from the source.
0x0010 - nomodify, Ignore all NTP information
queries and configuration requests
that attempt to modify the state of the server.
0x0020 - nopeer, Provide stateless time service to
polling hosts, but do not allocate peer
memory resources to these hosts even if
they otherwise might be considered useful
as future synchronization partners.
0x0040 - notrap, Decline to provide control message
trap service to matching hosts.
0x0080 - lowpriotrap, Declare traps set by matching
hosts to be low priority.
0x0100 - limited, These hosts are subject to a
limitation of the number of clients from the same net.
0x0200 - version. Serves only current version.
0x0400 - demobilize. A demobilization packet (kod) packet is sent."
DEFVAL { 0 }
|
|
