Main page
OID Repository
https://oid-base.com
Display OID:

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 644 eriProducts(2) dnx(4) devices(2) dnxDS0DP(6) ds0DpDiag(2) ds0dpPortDiagTable(1) ds0dpPortDiagEntry(1) ds0dpDiagNetLoop(6)}

ds0dpDiagNetLoop(6)

 
 

OID description



 
OID: (ASN.1 notation)
(dot notation)
(OID-IRI notation)

Description:

ds0dpDiagNetLoop OBJECT-TYPE
SYNTAX INTEGER {
off (5),
local(44),
ocu (45),
csu (46),
ds0ToNet (47),
ds0FromNet (48)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines the current latching DS0 Dataport loopback code
on the network side (T1 digital line side) for this port.
In order to turn on a loop, the port must be configured In Service
with a Connection.
off (0) - indicates network loopback is disabled
local (5) - the incoming DS0 data from the far end enters the DS0DP
and is looped back towards the far end. Also, the DS0DP
sends the DDS Mux-Out-Of-Sync-Code in place of the DS0
data from the network towards the drop.
ocu (45)- triggers the DS0DP to send a standard DDS OCU loop code
towards the far end.
csu (46)- triggers the DS0DP to send a standard DDS CSU loop code
towards the far end.
ds0ToNet (47) - loops the DS0 data towards the network side.
ds0FromNet(48) - loops the DS0 data from the network side."



Classification:

MIB object for network management

 
See classes of OIDs

Note to implementers:




 
 
Short link:


Parent OID: ds0dpPortDiagEntry(1) First sibling OID: ds0dpDiagResource(2) Previous sibling OID: ds0dpDiagDropLoop(5) Next sibling OID: ds0dpDiagBertState(7) Last sibling OID: ds0dpDiagCmdStatus(12)