|
|
Description:
|
sts1T1E1CfgCmdStatus OBJECT-TYPE
SYNTAX LinkCmdStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The command status for this link configuration row/record.
The value used in a SET will be replaced by a response
value in the GET RESPONSE indicating success or failure.
Default Response State used in GET RESPONSE Command
ready-for-command (0)
initial default status for a row
STS1-T1 Link Commands used in SET Command (1..199)
update(1)
Change existing Link Configuration
inServiceAll (7)
Change Link Status to in-service for all 8 links.
copyToAll (9)
Copy T1 Link configuration to all other links
within the same device
outOfServiceAll (12)
Change Link Status to out-of-service for all 8 links.
Response States used in GET RESPONSE Command (100..199)
update-successful (101)
Link data has been successfully changed
insvc-successful (107)
All Links have been successfully placed In Service
copy-successful (109)
T1 Link data has been successfully copied to other links
oos-successful (112)
All Links have been successfully placed Out of Service
STS1-T1 Link Config Error Codes used in GET RESPONSE Command (400..699)
err-general-link-config-error (400)
Unknown link configuration error occurred
err-invalid-link-status (401)
Unrecognized link status setting
err-invalid-link-framing (402)
Line framing type not valid for link type
err-invalid-link-command (403)
Unrecognized link command-action
err-invalid-esf-format (405)
ESF type not applicable to link type
err-invalid-link-density (406)
Unrecognized T1 link density setting
err-invalid-network-loop (410)
Unrecognized network loop setting
err-invalid-yellow-alrm (411)
Unrecognized yellow alarm setting
err-invalid-red-timeout (412)
Unrecognized red alarm timeout
err-invalid-idle-code (413)
Unrecognized idle code
err-device-in-standby (414)
Can't change config for designated Standby device
err-data-locked-by-another-user (450)
Another administrative user is making changes to this
part of the system via a terminal session. Check Event
Log for user name
err-snmp-parse-failed (500)
Agent could not parse variable
err-invalid-snmp-type (501)
Variable ASN type does not match Agent defined type
err-invalid-snmp-var-size (502)
Variable size is too big"
|
|
|
|
|
|