|
|
Description:
|
addCmdStatus OBJECT-TYPE
SYNTAX ConnCmdStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The command status for this system connection row/record.
The value used in a SET will be replaced by a response
value in the GET RESPONSE indicating success or failure.
ready-for-command (0)
initial default status for a row
Action States used in SET Command (1..99)
delete (2)
remove existing connection
create (3)
add new connection
createNsave (4)
add new connection and save to file immediately
deleteNsave (6)
delete existing connection and update map file
immediately
Response States used in GET RESPONSE Command (100..199)
delete-successful (102)
connection has been successfully deleted
add-successful (103)
connection has been successfully added
add-save-successful (104)
connection has been successfully added & saved
del-save-successful (106)
connection has been successfully removed & saved
Connection Error Codes used in GET RESPONSE Command (200..799)
err-general-connection-error (400)
An unknown system connection error occurred
err-src-broadcast-id-not-found (401)
Unable to find listener using this broadcast ID
err-src-port-in-use (402)
Source port cannot support multiple connections
err-dest-port-in-use (403)
Dest port cannot support multiple connections
err-conn-name-in-use (404)
Connection name already exists
err-invalid-broadcast-id (405)
Broadcast connection id out of valid range
err-invalid-src-slot (406)
Source slot number out of valid range
err-invalid-src-port (407)
Source port number out of valid range
err-invalid-src-timeslot (408)
Source timeslot number out of valid range
err-src-port-bandwidth-exceeded (409)
Source port cannot support requested timeslots
err-invalid-dest-slot (410)
Destination slot number out of valid range
err-invalid-dest-port (411)
Destination port number out of valid range
err-invalid-dest-timeslot (412)
Destination timeslot number out of valid range
err-dest-port-bandwidth-exceeded (413)
Dest port cannot support requested timeslots
err-invalid-command (414)
Unrecognized connection command-action
err-not-enough-bts-available (415)
Not enough available timeslots on Backplane
err-src-port-cannot-support-voice (416)
Device type in source slot does not support voice
err-dest-port-cannot-support-voice (417)
Device type in dest slot does not support voice
err-invalid-communications-for-device (418)
Only E1 devices support Au-law to Mu-law conversion
err-invalid-communications-type (419)
Unrecognized connection communications
err-invalid-conn-name (420)
Invalid connection name length
err-invalid-conn-type (421)
Unrecognized connection type
err-invalid-conn-speed (422)
Unrecognized connection speed code
err-invalid-conn-record (423)
Connection record contains missing or invalid fields
err-invalid-conn-id(425)
Connection Id out of range or already in use.
err-conn-not-saved-to-map(426)
Connection was added but save to file failed
err-connection-map-full (427)
No connections available for the map
err-invalid-card-type (428)
Invalid card type used for making the connection.
err-invalid-conn-bit-group (429)
Invalid bit-group selected for the globally set compression rate.
err-conn-max-channels-used (430)
All compression channels are in use
err-src-xlink-slot-not-assigned(431)
STM1X/OC3X virtual nest nbr undefined for src slot
err-dest-xlink-slot-not-assigned(432)
STM1X/OC3X virtual nest nbr undefined for dest slot
err-data-locked-by-another-user (450)
Another administrative user is making changes to this
part of the system via a terminal session. Check Event
Log for user name
err-snmp-parse-failed (500)
Agent could not parse variable
err-invalid-snmp-type (501)
Variable ASN type does not match Agent defined type
err-invalid-snmp-var-size (502)
Variable size is too big"
|
|
|
|
|
|