|
|
Description:
|
xNestCmdStatus OBJECT-TYPE
SYNTAX INTEGER {
-- Initial default status for a row
ready-for-command (0),
-- Nest Device Commands used in SET Command (1..99)
update-nest-config (1),
delete-nest-config (2),
switch-mgr-cards (3),
reset-device-cards (4),
clear-device-errors (5),
switch-xcc-cards (6),
switch-xlink-cards (7),
-- Response States used in GET RESPONSE Command (100..199)
update-successful (101),
delete-successful (102),
switch-mgr-successful (103),
reset-successful (104),
clear-successful (105),
switch-xcc-successful (106),
switch-xlink-successful (107),
-- Nest Config Error Codes used in GET RESPONSE Command (200..799)
err-general-nest-config-error (200),
err-invalid-nest-type (201),
err-invalid-nest-command (202),
err-invalid-nest-name (203),
err-invalid-nest-alrm (204),
err-invalid-nest-ndr (205),
err-invalid-nest-option (206),
err-cannot-delete-online-nest (207),
err-nest-not-present(208),
err-data-locked-by-another-user (450),
err-snmp-parse-failed (500),
err-invalid-snmp-type (501),
err-invalid-snmp-var-size (502)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The command status for this nest configuration row/record.
The value used in a SET will be replaced by a response
value in the GET RESPONSE indicating success or failure.
Default Response State used in GET RESPONSE Command
ready-for-command (0)
initial default status for a row
Nest Device Commands used in SET Command (1..99)
update-nest-config (1)
change an aspect of current nest configuration
delete-nest-config (2)
remove existing Nest Configuration. Deleting the Nest
Configuration using the Nest Command Status will result
in the removal of all configured connections associated
with that nest number.
switch-mgr-cards (3)
Perform Switchover to Standby SMC/XNM card in associated
Nest
reset-device-cards (4)
Reset all device cards in associated Nest
clear-device-errors (5)
Clear error counters for all channel cards in
associated Nest
switch-xcc-cards (6)
Perform Switchover to Standby XCC card in associated
Nest
switch-xlink-cards (7)
Perform Switchover to Standby XLC card in associated Nest.
Response States used in GET RESPONSE Command (100..199)
update-successful (101)
nest data has been successfully changed
delete-successful (102)
nest data has been successfully removed
switch-mgr-successful (103)
nest system managers has been successfully switched
reset-successful (104)
nest device cards have been issued reset requests
clear-successful (105)
nest device cards have been issued clear error requests
switch-xcc-successful (106)
nest xcc's has been successfully switched
switch-xlink-successful (107)
nest xlink cards has been successfully switched
Nest Config Error Codes used in GET RESPONSE Command (200..799)
err-general-nest-config-error (200)
Unknown nest configuration error occurred.
err-invalid-nest-type (201)
Configured nest type not in valid range
err-invalid-nest-command (202)
Unrecognized nest command-action
err-invalid-nest-name (203)
Configured nest name too long
err-invalid-nest-alrm (204)
Configured nest alarm contacts not in valid range
err-invalid-nest-ndr (205)
N+1 Redundancy not supported for nest
err-invalid-nest-option (206)
Dual XCC/XLC or Dual SMC option not valid
err-cannot-delete-online-nest (207)
Nest cannot be online when deleting configuration
err-nest-not-present (208)
Nest not ready for command
err-data-locked-by-another-user (450)
Another administrative user is making changes to this
part of the system via a terminal session. Check Event
Log for user name
err-snmp-parse-failed (500)
Agent could not parse variable
err-invalid-snmp-type (501)
Variable ASN type does not match Agent defined type
err-invalid-snmp-var-size (502)
Variable size is too big"
|
|
|
|
|
|