|
|
Description:
|
xdslLineSeltTxSignPsdType OBJECT-TYPE
SYNTAX SeltTxSignPsdType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defines the Tx signal Psd type to be used as limit for the
SELT echo response measurement excitation signal.
The possible values are:
- txSignPsdTypeDefault (1): Select the board dependant
default Tx signal Psd Type.
- txSignPsdTypeFromConfig (2): Derive PSD from the modem
line configuration data. The actual used Tx Signal Psd type can
be retrieved via the xdslSeltSelectedPsdTypeUsed object.
- txSignPsdTypeFromConfigVdsl2 (3): Derive PSD from the VDSL2
modem line configuration data.
- txSignPsdTypeFromConfigVdsl1 (4): Derive PSD from the VDSL1
modem line configuration data.
- txSignPsdTypeFromConfigAdsl1or2 (5): Derive PSD from the ADSL2 or
ADSL1 modem line configuration data.
- txSignPsdTypeFromConfigAdsl2Plus (6): Derive PSD from the ADSL2+
modem line configuration data.
- txSignPsdTypePreDefVdsl2 (7): Derive PSD from the
predefined, hard-coded VDSL2 profile.
(The modem line configuration data is to be ignored).
- txSignPsdTypePreDefVdsl1 (8): Derive PSD from the
predefined, hard-coded VDSL1 profile.
(The modem line configuration data is to be ignored).
- txSignPsdTypePreDefAllBandsVdsl2 (9): Derive PSD from the
predefined, hard-coded all bands VDSL2 profile.
(The modem line configuration data is to be ignored).
- txSignPsdTypePreDefAllBandsAdsl1 (10): Derive PSD from the
predefined, hard-coded all bands ADSL1 profile.
(The modem line configuration data is to be ignored).
- txSignPsdTypePreDefAllBandsAdsl2Plus (11): Derive PSD from the
predefined, hard-coded all bands ADSL2+ profile.
(The modem line configuration data is to be ignored).
- txSignPsdTypePreDefVdsl2RegionA (12): Derive PSD from the
predefined, hard-coded VDSL2 profile consistent with Annex A
of G.993.2
(The modem line configuration data is to be ignored).
- txSignPsdTypeFrom8dConfig (13): Derive PSD from the modem line
configuration data except for the VDSL2 profile that is fixed to
8d for SELT. It can also be that ADSL configuration is selected
when the line is configured in ADSLx. The actual used Tx Signal
Psd type can be retrieved via the xdslSeltSelectedPsdTypeUsed
object.
- txSignPsdTypeFrom8dConfigVdsl2 (14): Derive PSD from the VDSL2
modem line configuration data except for the VDSL2 profile that
is fixed to 8d for SELT. It should give an error when the board
is configured in ADSL mode. The actual used Tx Signal Psd type
can be retrieved via the xdslSeltSelectedPsdTypeUsed object.
Default value is txSignPsdTypeDefault.
ALCATEL NOTE:
ACCESS: NA USAGE: OPT
PERSIST: NO INSRVMOD: NA
RANGE: NA DEFVALUE: txSignPsdTypeDefault
UNITS: NA SPARSE: NA
DESCR: NA"
|
|