|
|
Description:
|
mscShelfTestAutomaticBusClockTest OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether or not a bus clock source test is
automatically executed after a clock source's LP state changes, and
after failure or recovery of the active CP bus clock source. Since
tests of an alternate bus clock source may cause a minor loss of
traffic, the attribute is set to disabled by default.
If set to enabled, a bus clock source test is automatically executed.
If the status of the corresponding Shelf Bus clockSourceStatus is
changed after the test, an alarm is issued if the status is one of the
following: ok, failed, or unknown.
If set to disabled, no bus clock source test is automatically
executed. However, a test can be executed by the RUN command. If
the status is changed after the test, an alarm is issued if the status is
one of the following: ok, or failed."
DEFVAL { disabled }
|
|
|
|
