|
|
Description:
|
mscLpDS3DS1RxRaiAlarm OBJECT-TYPE
SYNTAX INTEGER {
on(0),
off(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates whether an RAI (Remote Alarm Indication)
alarm state has been entered. An RAI alarm state is entered when
the RAI defect indicator has been observed and accumulated for 3.5
seconds +/- 0.5 seconds. If the RAI defects are intermittently
occurring, the RAI defect accumulator is decremented at a rate of 1/
10 of the incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
The RAI alarm state is cleared when the RAI defect indicator has
been absent for 10 seconds +/- 0.5 seconds. The RAI alarm is
usually an indication that the far end facility is unable to gain
synchronization."
DEFVAL { off }
|
|
|
|
