|
|
Description:
|
frAtmDlciNiwfTrafficParmConvPolicy OBJECT-TYPE
SYNTAX INTEGER {
policyNotAvailable(0),
n3(3),
n4(4),
n5(5),
n6(6) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the traffic parameter conversion policy that
is used for this connection.
Policy 3 characterizes the traffic in the following way:
- ATM traffic descriptor type 6 is selected.
- PCR(0+1) is based on the ATM link rate.
- SCR(0+1) is based on the CIR and EIR.
- MB(0+1) is based on Bc, Be, CIR, EIR and AR.
- Takes into account that the instantaneous rate of the frame relay
stream can be above CIR and up to the AR.
Policy 4 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer.
- PCR(0+1) is based on AR.
- SCR(0) is based on the CIR.
- MBS(0) is based on Bc, CIR, and AR.
- There is no direct characterization of EIR. The allowed EIR can be
derived using the difference between the AR and CIR.
Policy 5 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer.
- PCR(0+1) is based on the CIR and EIR.
- SCR(0) is based on the CIR.
- MBS(0) is based on the CIR.
- The maximum PCR is no longer based on the AR but rather on the
CIR and EIR.
Policy 6 characterizes the traffic in the following way:
- ATM traffic descriptor type 3 is selected.
- PCR(0+1) is based only on the CIR
policyNotAvailable indicates that the trafficParmConvPolicy is not
yet available for this connection."
|
|
