|
|
Description:
|
frAtmDlciABitReasonFromIf OBJECT-TYPE
SYNTAX INTEGER {notApplicable(0), remoteUserSignaled(1), localLmiError(2), localLinkDown(4), pvcDown(6), missingFromLmiReport(7)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute provides the reason (if any) for an inactive status to be sent to the subnet.
The value is notApplicable when the aBitStatusFromIf attribute is active.
The value is remoteUserSignaled if the remote interface originating the A-Bit status detects that the virtual circuit is down at the remote network through the LMI protocol. The remote interface must be running network site LMI protocol for this A-Bit status reason to be sent.
The value is localLmiError if the LMI protocol is down at this interface.
The value is localLinkDown if the physical link is disabled at this interface.
The value is pvcDown if no A-Bit status has been sent to this interface from the local network.
The value is missingFromLmiReport if the remote interface did not provide a reason along with the inactive A-Bit status."
|
|
|
|
