|
|
Description:
|
frUniLmiOpProcedures OBJECT-TYPE
SYNTAX INTEGER {
none(0),
vendorForum(1),
ansi(2),
itu(3),
unknown(4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The opProcedures attribute indicates the procedures being used for
the Local Management Interface. This attribute should be ignored if
protocolStatus is not normalCondition. The following procedures
are supported:
none: Local Management Interface procedures are not running on
this interface. This accommodates Frame Relay user equipment that
has not implemented any LMI procedures.
vendorForum: Local Management Interface procedures from the
Vendor Forum specification are running on this interface. DLCI
1023 is used for the LMI protocol.
ansi: Local Management Interface procedures from the ANSI
specification are running. DLCI 0 is used for the LMI protocol.
itu: Local Management Interface procedures from the ITU-T
specification are running. DLCI 0 is used for the LMI protocol. Was
previously ccitt.
unknown: Local Management Interface procedures have yet to be
determined by Adaptive LMI."
|
|
|
|
