|
|
Description:
|
frNniDlciDcTransferPriority OBJECT-TYPE
SYNTAX INTEGER {
n0(0),
n1(1),
n2(2),
n3(3),
n4(4),
n5(5),
n6(6),
n7(7),
n8(8),
n9(9),
n10(10),
n11(11),
n12(12),
n13(13),
n14(14),
n15(15),
useDnaDefTP(255) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the transfer priority to network for the
outgoing calls using this particular DLCI. It overRides the
defaultTransferPriority provisioned in its associated Dna
component.
The transfer priority is a preference configured for an application
according to its delay-sensitivity requirement. Frames with higher
transfer priority are served by the network before the frames with
lower priority. The transfer priority standard is defined to have 16
levels from 0 to 15.
Each transfer priority n, where n is the transfer priority index,
contains a default setting for routing class of service (multimedia,
delay or throughput) and frame relay egress queue (depending on
the number of supported egress queues on the remote end interface)
specified by the routingClassOfService and emissionPriority
attributes provisioned under the Mod Frs DprsNet Tpm/n
component. The default mapping can be altered by a user if
required.
The default of transferPriority is useDnaDefTP. It means using the
provisioning value under defaultTransferPriority of its associated
Dna for this DLCI."
DEFVAL { useDnaDefTP }
|
|
