|
|
Description:
|
mpanlDlciABitReasonToIf OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(0),
remoteUserSignaled(1),
remoteLmiError(3),
remoteLinkDown(5),
vcDown(6) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute provides the reason (if any) for an inactive status to be
sent to the interface. This reason is not applicable for an active
status.
A-Bit status reason description:
The A-Bit status reason is notApplicable when the A-Bit status is
active.
The A-Bit status reason is remoteUserSignaled if the SPVC end
point originating the A-Bit status has detected that the virtual circuit
is down at the remote network through the LMI protocol. The
SPVC end point must be running network site LMI protocol for this
A-Bit status reason to be sent.
The A-Bit status reason is remoteLmiError if the LMI protocol is
down at the SPVC end point originating this A-Bit status reason.
The A-Bit status reason is remoteLinkDown if the physical
interface is disabled at the SPVC end point originating this A-Bit
status reason.
The A-Bit reason is vcDown if no A-Bit status has been sent to the
interface (i.e., no A-Bit status has been relayed)."
DEFVAL { vcDown }
|
|
|
|
