|
|
|
|
Description:
|
atmIfVptVccVcdTmAbrFarEndAcrDecreaseTimeFactor OBJECT-TYPE
SYNTAX Unsigned32 (0..1023 | 1024)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Allowed Cell Rate Decrease Time Factor
(ADTF) of the far end ABR source. The value specified should be
the same as the ADTF parameter at the far end of this ABR
connection.
The value of this attribute is used in policing an ABR connection
using the Dynamic Generic Cell Rate Algorithm (DGCRA). A
larger value for this attribute implies a more lenient policer. When
the delay between two consecutive forward Resource Management
(RM) cells received at this interface corresponds to a value greater
than the value of this attribute, the policer begins to limit enforce
the incoming traffic at the initial cell rate (ICR) of the far end, as
specified by the farEndInitialCellRate attribute.
VALUES (
1024 = sameAsLocal
)"
DEFVAL { 1024 }
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2025 |
iso(1)
