|
|
Description:
|
appnDlciDcType OBJECT-TYPE
SYNTAX INTEGER {
permanentMaster(1),
permanentSlave(2),
permanentBackupSlave(3),
permanentSlaveWithBackup(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the type of Vc call:
permanentMaster,
permanentSlave,
permanentSlaveWithBackup,
permanentBackupSlave.
If the value is set to permanentMaster, then a permanent
connection will be established between two ends. The remote end
must be defined as a permanentSlave, permanentBackupSlave or
permanentSlaveWithBackup. The connection cannot be established
if the remote end is defined as anything else. The end defined as
permanentMaster always initiates the calls. It will attempt to call
once per minute.
If the value is set to permanentSlave then a permanent connection
will be established between 2 ends. The remote end must be defined
as a permanentMaster. The connection cannot be established if the
remote end is defined as anything else. The permanentSlave end
will attempt to call once per minute.
If the value is set to permanentSlaveWithBackup then a permanent
connection will be established between the 2 ends . The remote end
must be defined as a permanentMaster. The Connection cannot be
established if the remote end is defined as anything else. The
permanentSlaveWithBackup end will attempt to call once per
minute.
If the value is set to permanentBackupSlave then a permanent
connection will be established between the 2 ends only if the
permanentMaster end is disconnected from the
permanentSlaveWithBackup end and a backup call is established
by the redirection system. If the permanentSlaveWithBackup
interface becomes visible again, the permanentBackupSlave end is
disconnected and the permanentSlaveWithBackup end is
reconnected to the permanentMaster end. The
permanentBackupSlave end does not try to establish PVC call."
DEFVAL { permanentMaster }
|
|
|
|
