|
|
|
|
Description:
|
hmtsCommManagementMethod OBJECT-TYPE
SYNTAX INTEGER {automatic(1), manual(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines how community strings are assigned to transponders.
automatic - HMTS automatically assigns each device a
its community string. The user may not be able
to modify the community string in the hmtsDevTable.
The community string generated is normally based
upon the device's MAC address. In the SCTE 25-2
document (formerly HMS004), section A.4.2, there is
a recommended method.
manualHmts - Configuration of the community string is to be made
manually through the HMTS. Setting the community string
in the hmtsDevTable table does this.
manualXp - Configuration of the community string is manually set
prior to the transponder being put on the network.
If the community string is invalid, then the community
string assignment must be made manually using the
hmtsDevTable table.
Note: is the responsability of the HMTS to keep the community strings
in the device and in the corresponding row of the hmtsDevCommString
column consistent. Each time the EMS changes the community string in
the device table, the HMTS must issue an SNMP set command to the
device (commonTrapCommunityString) such that these community strings
remain equal.
This object is non-volatile."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |
