|
|
|
|
Description:
|
hmtsIPManagementMethod OBJECT-TYPE
SYNTAX INTEGER {client(1), manualXp(2), manualHmts(3), automatic(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines how IP addresses are handed out to transponders.
client - HMTS provides a gateway-proxy for serial devices
to either an external or an internal DHCP server.
ManualXp - Configuration of the IP address is manually set
prior to the Transponder being put on the network.
If the IP is invalid, then the IP address
assignment must be made manually using the HMTS
MAC device table.
manualHmts - Configuration of the IP address is to be made
manually through the HMTS. Setting the IP address
in the HMTS MAC device table does this.
automatic - HMTS automatically assigns IP addresses without
the use of a DHCP server.
Note: is the responsability of the HMTS to keep the IP address stored
in the device and in the corresponding row of the hmtsDevIPAddr
column consistent. Each time the EMS changes the IP address in
the device table, the HMTS must issue a SET_ADDR PDU to the device
such that both IP addresses remain identical. See also SCTE 25-2
(formerly HMS004).
This object is non-volatile."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |
iso(1)
