|
|
Description:
|
hmtsProxyType OBJECT-TYPE
SYNTAX INTEGER {ipBased(1), communityBased(2), both(3)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value controls the type of proxy supported by the HMTS,
Community, IP, or MIB based. If the termination system does not
support setting a specific value the termination system shall
return a bad-value response.
The HMTS will either be:
ipBased - The HMTS uses an IP address to designate the
network element where the SNMP request is
destined.
communityBased - The HMTS uses the SNMP community string to
designate the network element there the SNMP
request is destined.
both - The HMTS can use either proxy schemas to
designate the network element where the SNMP
request is destined.
This object is non-volatile."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |