|
|
|
|
Description:
|
hmtsAdminState OBJECT-TYPE
SYNTAX INTEGER {active(1), inactive(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This controls whether the HMTS monitoring service is active
active - The HMTS is actively looking for traps and
non-responding devices on the serial links. Fully Enabled
functionality of the HMTS.
inactive - The HMTS does not poll devices to search for
non-respondering devices or alarms (Synchronous or
Asynchronous), but HMTS continues all other
activities. Contention mode is set to OFF while
inactive. This disables registration as well as
polling. No messages from a higher level manager
will be forwarded to the devices. In essence all
directed communication to or from the device is
disabled.
In both states SNMP requests to configured serial equipment is
possible. Sending CHNLDESC and TIME PDUs continues at their
configured intervals.
This object is non-volatile."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |
iso(1)
