|
|
Description:
|
rfAmpDCPowerName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the Physical name of the Power Supply. For example:
24 VDC Supply A
Actual value of this field is vendor specific, at a minimum it
shall identify the nominal voltage expected and distinguish the
supplies from one another.
If a single PHYSICAL supply provides multiple voltages, each voltage
shall have its own entry in this table, with an appropriate name.
This name is put into the alarmText object in the hmsAlarmEvent Trap
when alarms are generated by objects in this table."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |