|
|
Description:
|
lineProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF LineProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table which contains Zhone-specific
descriptions of each physical line. There is one
entry for each physical line in the system and
it's primary use is for a user to specify redundant
lines in the system.
An entry is automatically created by the associated
driver whenever a new card is inserted in the
system (specifically when an ifindex value is
allocated for this port).
Statistics, admin state, and operational state
can be obtained by the matching ifEntry.
This line is part of a redundancy group if the
lgRedundancyGroupId is non-zero. This value is a
cross-reference to the maching line redundancy group
table and must be created by the user.
In order for a line/ifEntry to be admin'd active,
this line MUST be part of a line redundancy group
(even if no redundancy is being configured)."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |