OID repository
OID Repository
https://oid-base.com
Display OID:
 
Action itemiso(1) Action itemidentified-organization(3) Action itemdod(6) Action iteminternet(1) Action itemprivate(4) Action itementerprise(1) Action item5504 Action itemzhoneExperimental(10) Action itemietfDrafts(1)   Navigating the OID tree
efmCuMIB(7)
child OIDs: Child OID separator efmCuObjects(1) Child OID separator efmCuConformance(2) Child OID separator
 
Separation line
 
OID description

   
OID: (ASN.1 notation)
(dot notation)
(OID-IRI notation)

Description:

efmCuMIB MODULE-IDENTITY
LAST-UPDATED "200504040000Z" -- April 04, 2005
ORGANIZATION "IETF Ethernet Interfaces and Hub MIB Working Group"
CONTACT-INFO
"WG charter:
http://www.ietf.org/html.cha...hubmib-charter.html
Mailing Lists:
General Discussion: hubmib@ietf.org
To Subscribe: hubmib-request@ietf.org
In Body: subscribe your_email_address
Chair: Dan Romascanu
Postal: Avaya
Atidim Technology Park, Bldg. 3
Tel Aviv 61131
Israel
Tel: +972 3 645 8414
E-mail: dromasca@avaya.com
Editor: Edward Beili
Postal: Actelis Networks Inc.
25 Bazel St., P.O.B. 10173
Petach-Tikva 10173
Israel
Tel: +972-3-924-3491
E-mail: edward.beili@actelis.com"
DESCRIPTION
"The objects in this MIB module are used to manage
the Ethernet in the First Mile (EFM) Copper (EFMCu) Interfaces
2BASE-TL and 10PASS-TS, defined in IEEE Draft P802.3ah/D3.3.
The following reference is used throughout this MIB module:
[802.3ah] refers to:
IEEE Std 802.3ah-2004: 'IEEE Standard for Information
technology - Telecommunications and information exchange
between systems - Local and metropolitan area networks -
Specific requirements -
Part 3: Carrier Sense Multiple Access with Collision
Detection (CSMA/CD) Access Method and Physical Layer
Specifications -
Amendment: Media Access Control Parameters, Physical
Layers and Management Parameters for Subscriber Access
Networks', 07 September 2004.
Of particular interest are Clause 61, 'Physical Coding
Sublayer (PCS) and common specifications, type 10PASS-TS and
type 2BASE-TL', Clause 30, 'Management', Clause 45,
'Management Data Input/Output (MDIO) Interface', Annex 62A,
'PMD profiles for 10PASS-TS' and Annex 63A, 'PMD profiles for
2BASE-TL'.
Naming Conventions:
Atn - Attenuation
CO - Central Office
CPE - Customer Premises Equipment
EFM - Ethernet in the First Mile
EFMCu - EFM Copper
MDIO - Management Data Input/Output
Mgn - Margin
PAF - PME Aggregation Function
PCS - Physical Coding Sublayer
PMD - Physical Medium Dependent
PME - Physical Medium Entity
PSD - Power Spectral Density
SNR - Signal to Noise Ratio
TCPAM - Trellis Coded Pulse Amplitude Modulation
Copyright (C) The Internet Society (2004). This version
of this MIB module is part of RFC XXXX; see the RFC
itself for full legal notices."
-- EdNote: Replace XXXX with the actual RFC number &
-- remove this note
REVISION "201206290000Z" -- June 29, 2012 at 00:00 GMT
DESCRIPTION "Added SHDSL Regenerator Statistics."
REVISION "200504040000Z" -- April 04, 2005
DESCRIPTION "Initial version, published as RFC XXXX."


 
Short URL for this page:

Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2025
Tree display Parent OID: ietfDrafts(1) First child OID: efmCuObjects(1) First sibling OID: apsMIB(1) Previous sibling OID: efmOamMIB(6) Next sibling OID: pwTcStdMIB(8) Last sibling OID: zhoneRmonMibModule(12)
Separation line
OID helper Webmaster Bullet 11 Jan 2021 Bullet Page top