|
|
Description:
|
wtSeriFtpAutoFtp OBJECT-TYPE
SYNTAX INTEGER {wtSeriAutoFtpOff(1), wtSeriAutoFtpOn(2)}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set this switch to 2 to activate the automatic FTP client. This mode is
recommended when the same command needs to be executed over and over. The
FTP commands are stored in the Com-Server. The latter opens a connection
to the FTP server when it receives data on the serial port. It sends the
login and runs the configured file command. Then the connection is closed
again. Configure the command in the following parameter
wtSeriFtpLoginString.
Set this switch to 1 to activate the FTP client with serial protocol.
See section FTP client mode in the corresponding manual for the
Com-Server."
|
|
|
|
