|
|
Description:
|
rdnLoadBalBasicRuleEnable OBJECT-TYPE
SYNTAX INTEGER {
upstream(1),
downstream(2),
interval(3),
registration(4),
rem-dsx(5),
spec-trig(6),
ds-reg(7),
us-reg-bonding(8),
ds-reg-bonding(9)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When using this rule set, the load balancing algorithm is based on upstream and downstream
utilization by the values upstream(1) and downstream(2) respectively. Additionally, a Load
Balancing groups interval can be defined by value interval(3). Upstream Load Balancing during
modem registration can be enabled by value registration(4). Load Balancing after a resource
failure due to a DSX from a CPE can be enabled by value rem-dsx(5). Load balancing triggered
by a Spectrum Management bit rate change can be enabled by value spec-trig(6). Downstream Load
Balancing during modem registration can be enabled by value ds-reg(7). Upstream Load Balancing
with Bonding Groups during modem registration can be enabled by value us-reg-bonding(8).
Downstream Load Balancing with Bonding Groups during modem registration can be enabled by
value ds-reg-bonding(9). The load balancing
utilization thresholds are defined by the objects rdnLoadBalBasicRuleMinThres, rdnLoadBalBasicRuleDeltaThres
and rdnLoadBalBasicRuleStopThres objects if this object value is set to upstream(1) or
downstream(2). The modem count threshold is defined by the object
rdnLoadBalBasicRuleModemCountThres if this object value is set to registration(4), ds-reg(7),
us-reg-bonding(8), or ds-reg-bonding(9)."
|
|
|
|
