|
|
Description:
|
rdnSpectrumGroupConflictType OBJECT-TYPE
SYNTAX INTEGER {newMemberFreqOverlap(1), invalidChannelTypeMix(2), freqOverlapsExistingMember(3), hopFrequencyInUse(4), hopModulationInUse(5), hopSpareAssessInProgress(6), chanIsAgile(7), chanWidthOverlap(8), internalError(9)}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This entry contains the type of conflict that resulted in
a rdnCableSpectrumGroupConflictTrap:
newMemberFreqOverlap (1) indicates an attempt to add a
member channel to a spectrum group, when the assigned
frequency of the prospective member channel would have
overlapped with an existing frequency hop action definition,
or the frequency in use by an existing member channel.
invalidChannelTypeMix (2) indicates an attempt to add a 2x8
CMTS member channel to a spectrum group that contains 1x4 or
1x8 CMTS channels, or vice-versa.
freqOverlapsExistingMember (3) indicates an attempt to set
a frequency for a channel that is a member of a spectrum
group, and the frequency would conflict with an another
channel in the same spectrum group that is already using
that frequency.
hopFrequencyInUse (4) indicates an attempt to delete a hop
action frequency or band from a spectrum group configuration,
when a frequency in this range is currently in use as a
result of a hopping action. In order to achieve the desired
deletion, the operator must explicitly remove the frequency
from use, before updating the spectrum group.
hopModulationInUse(5) indicates an attempt to delete a
modulation profile hop action from a spectrum group
configuration, when the modulation profile is already in use,
as a result of a hopping action.
hopSpareAssessInProgress(6) indicates that the requested operation
could not be performed because a spare channel assessment was
already in progress.
channelIsAgile(7) means that the requested operation on a
member channel is not allowed because the channel is in a
frequency or modulation-agile state.
chanWidthOverlap(8) means that an attempted change to a channel
width of a member channel would cause a conflict within the
Spectrum Group, for another member channel or a configured
hop action.
internalError(9) implies an internal software or hardware error.
This is an unexpected error type, so report to Motorola, if it
ever occurs."
|
|
|
|
