|
|
Description:
|
rdnCableFrequencyHopFailureTrap NOTIFICATION-TYPE
OBJECTS {ifIndex, rdnCardIfSlotNumber, rdnCardIfPortNumber, rdnSpectrumGroupName, rdnSpectrumAgilityOldFrequency, docsIfUpChannelFrequency, docsIfUpChannelWidth, docsIfUpChannelModulationProfile, rdnCableAgilityHopAbortReason}
STATUS current
DESCRIPTION
"The BSR Spectrum Management feature attempted to initiate
an automatic frequency hop action, for purposes of noise avoidance,
but the hop attempt failed. The frequency of the upstream channel
is unchanged. Severity level = error(4).
PARAMETERS:
ifIndex is the interface index of the upstream physical channel
that attempted an automatic frequency change.
rdnCardIfSlotNumber is the chassis slot number of the CMTS card
that is associated with the ifIndex parameter.
rdnCardIfPortNumber is the port number of the receiver
that is associated with the ifIndex parameter.
rdnSpectrumGroupName is the Spectrum Group name associated
with the upstream channel that attempted the frequency change.
rdnSpectrumAgilityOldFrequency is the frequency to which
the upstream channel was tuned, before the attempted
frequency change. Presumably, this frequency had an inadequate
signal quality, which resulted in the attempted frequency
change. The receiver will still be tuned to this frequency,
because of the hop failure.
docsIfUpChannelFrequency is the new frequency which
the failed hop action had attempted to set for the
upstream channel
docsIfUpChannelWidth is the channel width for the upstream
channel that attempted the frequency change.
docsIfUpChannelModulationProfile is the modulation profile
associated with the upstream channel that attempted the
frequency change.
rdnCableAgilityHopAbortReason describes the reason that
the frequency hop failed"
|
|
|
|
