|
|
Description:
|
rdnCableSnrAbortReason OBJECT-TYPE
SYNTAX INTEGER {enableRxFreqInIdleSpectrum(0), addedRxFreqInIdleSpectrum(1), chanWidthChangeAffectsSNR(2), rxFreqChangeInIdleSpectrum(3), snrInProgressRxShutdown(4), spareChannelEvaluationRequest(5)}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This entry contains the rdnCableSnrAbortTrap reason code:
enableRxFreqInIdleSpectrum (0) indicates that the operator
enabled a receiver, for which the assigned frequency
might have conflicted with an SNR test that was
that was already in progress, in the same spectrum group.
addedRxFreqInIdleSpectrum (1) means that the operator added
a new receiver to a spectrum group, for which the
assigned frequency might have conflicted with an SNR
test that was in progress.
chanWidthChangeAffectsSNR (2) means that the operator set a
new, larger channel width that might have conflicted
with an SNR test that was already in progress.
rxFreqChangeInIdleSpectrum (3) means that the operator set a
new center frequency for a receiver, conflicting with the
range of idle spectrum for an SNR test that was already
in progress.
snrInProgressRxShutdown (4) means that the operator shutdown
the primary receiver, for which the RFSentry
already had an SNR test in progress.
spareChannelEvaluationRequest (5) means that the SNR test
was automatically preempted by the software, in order
to evaluate spare spectrum for purposes of performing
an agility hopping action on an impaired channel."
|
|
|
|
