|
|
Description:
|
qos802AceEtherType OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..'ffff'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the value that will be compared
against the value contained in the EtherType field of an
IEEE 802 frame. Example settings would include 'IP'
(0x0800), 'ARP' (0x0806) and 'IPX' (0x8137).
Setting the qos802AceEtherType object to -1 indicates
that EtherType data should not be considered during traffic
classification.
Note that the position of the EtherType field depends on
the underlying frame format. For Ethernet-II encapsulation,
the EtherType field follows the 802 MAC source address. For
802.2 LLC/SNAP encapsulation, the EtherType value follows the
Organization Code field in the 802.2 SNAP header. The value
that is tested with regard to this filter component therefore
depends on the data link layer frame format being used. If
this 802 ACE component is active when there is no EtherType
field in a frame (e.g., 802.2 LLC), a match is implied."
|
|
|
|
