|
|
Description:
|
ocStbHostDVIHDMIActive3DStructure OBJECT-TYPE
SYNTAX INTEGER {other(0), na(1), framePacking(2), fieldAlternative(3), lineAlternative(4), sideBySideFull(5), leftPlusDepth(6), leftPlusDepthPlusGraphicsPlusGraphicsDepth(7), topAndBottom(8), sideBySideHalf(9), sideBySideHalfQuincunx(10), noAdditionalHDMIInfo(17), no3DInformation(18), infoFrameNotAvailable(19)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object allows the manager to retrieve the
contents of the HDMI Vendor Specific InfoFrame currently
being transmitted by the source. The video signal
corresponds to the row associated with sink's current
'active' VIC. Only one row can reflect an active 3D format
at any point in time. The remaining, 'inactive', rows in
this table should report 'na(1)' for not applicable.
This object must be updated whenever the current
HDMI InfoFrame content differs from the last HDMI InfoFrame
transmitted. All reported values are based on the
HDMI InfoFrame packet contents defined in [HDMI].
If 3D is currently being signaled, report the 3D structure
identified in the InfoFrame.
If an HDMI InfoFrame is being transmitted but no 3D structure
is being signaled, use the HDMI_Video_format values in the
HDMI Infoframe to report as follows:
000 - 'noAdditionalHDMIInfo(17)'
001 - 'no3DInformation(18)'
If an HDMI InfoFrame is not being transmitted, report
'infoFrameNotAvailable(19)'."
|
|
|
|
