|
|
Description:
|
pktcEnEndPntClrFgnPotTsts OBJECT-TYPE
SYNTAX BITS {clrFgnPotentialResults(0), clrHazardousPotResults(1)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This MIB object is used to clear the current test results of supported conditions indicated by 'pktcEnEndPntFgnPotSupport'.
Setting a bit to a value of '1' clears the corresponding results in the MIB Object 'pktcEnEndPntFgnTestResults' and the validity as indicated by the MIB object 'pktcEnEndPntFgnTestValidity' for the supported conditions only (i.e., the MTA MUST set the corresponding bits to a value of '0' in the indicated tables).
If an SNMP SET attempts to set a bit corresponding to an unsupported condition to a value of '1', then the MTA MUST reject the entire SNMP SET and report an 'inconsistent value' error.
For all unsupported scenarios, the corresponding bits MUST be set to a value of '0'.
Whenever one or more tests are enabled by the MIB Object 'pktcEnEndPntRunFgnPotTests', the MTA MUST also reset the corresponding bits in this MIB Object to a value of '0'."
|
|
|
|
|
|
