|
|
Description:
|
docsIfMCmtsEqamDownstreamDevicePhyParamLock OBJECT-TYPE
SYNTAX BITS {
frequency(0),
bandwidth(1),
power(2),
modulation(3),
interleaver(4),
j83Annex(5),
symbolRate(6),
mute(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if by design the QAM Channel is directly
configurable. This BIT set is derived from the
dependency group a QAM channel belongs where
docsIfMCmtsEqamGroupDependencyType is equal to
docsPHYParamFixValue
When a specific BIT is set to '1', the PHY parameter
in docsIfMCmtsDepiSessionConfigTable is locked for SNMP
SETs, returning 'notWritable' on SET attempts.
When a specific BIT is set to '0', the PHY parameter
in docsIfMCmtsDepiSessionConfigTable is processed.
Note that when a BIT is set to '0' an SNMP SET as described
above may affect the PHY parameter in other QAM channels
as described in docsIfMCmtsEqamGroupDependencyTable
or rejected with error 'wrongValue' based on the constrains
indicated by the EQAM capabilities
docsIfMCmtsEqamDownstreamCapabilitiesTable of
DOCS-If-M-CMTS-MIB.
This object contains information that is used to signal
'lock' PHY parameters to other entities via interfaces such
as DEPI and ERMI."
|
|
|
|
