|
|
|
|
Description:
|
cdx6500VoiceCfgRxOutputSignalLevel OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enter the output signal level. To be selected in steps of
0.5 dBm.
FXO Interface Type : 600 Ohms +0.0 to -8.0dbm
600 Ohms Adaptive +0.0 to -8.0dbm
FXS Interface Type : 600 Ohms +0.0 to -9.0dbm
Canada +0.0 to -9.0dbm
UK -1.5 to -9.0dbm
Germany -2.0 to -9.0dbm
France -1.5 to -9.0dbm
Belgium -1.5 to -9.0dbm
E&M Interface Type : 4-Wire/600 +7.0 to -16.0dbm
2-Wire/600 +3.0 to -16.0dbm
2-Wire/UK +1.0 to -16.0dbm
2-Wire/Germany +0.0 to -16.0dbm
Virtual Ports(100 and above): +6.0 to -8.0dbm
Entering a negative number for the 'Output Signal Level'
will result in the DSPM card attenuating the signal by that
many dB. Entering a positive number for the 'Output Signal
Level' will result in the DSPM card amplifying the signal
by that many dB."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved © 2007-2024 |
