|
|
Description:
|
reroutingFilterSoftReroutingServiceRequest OBJECT-TYPE
SYNTAX SoftReroutingServicesClass
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates which soft rerouting service is requested by the
network on behalf of the user when a setup matches this
address filter.
'none' means that no soft rerouting service is requested
for the call.
'dbrIntraDomainAsymmetricSoftRerouting' means that the
Domain-based asymmetric soft rerouting service is requested
for the call within this rerouting domain only. This value
can be set if the switch is connected directly to the ATM end
system, or if it is connected to another switch with an
inter-domain interface (e.g. AINI, UNI, inter-domain PNNI)
'dbrIntraDomainSymmetricSoftRerouting' means that the
Domain-based symmetric soft rerouting service is requested
for the call within this rerouting domain only. This value
can be set if the switch is connected directly to the
ATM end system, or if it is connected to another switch with
an inter-domain interface (e.g. AINI, UNI, inter-domain PNNI)
The service specified in this object is only requested for the
call if the service is available for this interface.
(see object reroutingFilterInterNetworkServicesAvailable)
The determination of the activation of the service depends on
the service availability at the other edge nodes. The
procedures are described in sections 6.2.1 and 6.3.2."
REFERENCE
"ATM Forum Domain-based rerouting 1.0"
DEFVAL { none }
|
|
|
|
