|
|
Description:
|
atmTracePathTestEntry OBJECT-TYPE
SYNTAX AtmTracePathTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table specifies a test connection or test
party that is initiated in order to determine a path across
the network. Typically the connection or party is cleared when
the trace destination node is reached, but the entry may be
configured to leave the connections up using the
atmTracePathTestClearCallAtTDest object. The results of the
path trace are returned in the atmTraceFilterRecordTable, the
atmTraceRecordTable, and the atmTraceInfoTable.
A management station wishing to create an entry should first
create the associated instance of the row status and row
owner objects, using a value of atmTracePathTestIndex that is
not currently in use. It must also, either in the same or
in successive PDUs, create the associated instance of the
address objects. It should also modify the default values
for the other configuration objects if the defaults are not
appropriate.
Once the appropriate instance of all the configuration
objects have been created, either by an explicit SNMP
set request or by default, the row status should be set
to active to initiate the request. Note that this entire
procedure may be initiated via a single set request which
specifies a row status of createAndGo as well as specifies
valid values for the non-defaulted configuration objects.
After the test connection or party completes, the management
station should retrieve the values of the status objects of
interest from the atmTraceRecordTable, and should then delete
the entry. In order to prevent old entries from clogging the
table, entries will be aged out, but an entry will not be
deleted within 5 minutes of completing."
INDEX { atmTracePathTestIndex }
|
|
|
|
