|
|
Description:
|
funiMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
FUNI MIB.
Groups of FUNI objects required for management of a FUNI
logical interface on a FUNI network or user device are
identified by the suffix MinGroup.
Groups of optional FUNI objects are identified by the suffix
OptionalGroup."
MODULE -- this module
MANDATORY-GROUPS {
funiIfConfMinGroup,
funiIfStatsMinGroup
}
OBJECT funiIfConfMode
MIN-ACCESS read-only
DESCRIPTION
"The ability to support modes other than 1a (and thus to specify
whether these modes are used) is optional."
OBJECT funiIfConfFcsBits
MIN-ACCESS read-only
DESCRIPTION
"The ability to support a 32-bit FCS (and thus to specify
whether a 16- or 32-bit FCS is used) is optional for Mode
1a and 1b."
OBJECT funiIfConfSigSupport
MIN-ACCESS read-only
DESCRIPTION
"The ability to support signaling (and thus to specify whether
support for it is enabled or disabled) is optional."
OBJECT funiIfConfSigVpi
MIN-ACCESS read-only
DESCRIPTION
"The ability to support SVCs (and thus to specify the VPI to be
used on the signaling channel) is optional."
OBJECT funiIfConfSigVci
MIN-ACCESS read-only
DESCRIPTION
"The ability to support SVCs (and thus to specify the VCI to be
used on the signaling channel) is optional."
OBJECT funiIfConfIlmiSupport
MIN-ACCESS read-only
DESCRIPTION
"The ability to support ILMI (and thus to specify whether it is
enabled or disabled) is optional."
OBJECT funiIfConfIlmiVpi
MIN-ACCESS read-only
DESCRIPTION
"The ability to support ILMI (and thus to specify the VPI to be
used on the ILMI channel) is optional."
OBJECT funiIfConfIlmiVci
MIN-ACCESS read-only
DESCRIPTION
"The ability to support ILMI (and thus to specify the VCI to be
used on the ILMI channel) is optional."
OBJECT funiIfConfOamSupport
MIN-ACCESS read-only
DESCRIPTION
"The ability to support OAM cell/frame translation (and thus to
specify whether support for it is enabled or disabled) is
optional."
|
|
|
|
