|
|
Description:
|
isdnBriPortTestType OBJECT-TYPE
SYNTAX INTEGER {
physicalPortLoopback (1),
dChannelPhysicalPortLoopback (2),
b1ChannelPhysicalPortLoopback (3),
b2ChannelPhysicalPortLoopback (4),
dChannelAal2Loopback (5),
b1ChannelAal2Loopback (6),
b2ChannelAal2Loopback (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to specify the type of test to run for
ISDN-BRI ports. There are no results stored locally for a
loopback test. Loopback of the whole ISDN-BRI physical user
port is supported where all the D, B1 and B2 channels are
looped back simultaneously, along with individual loopback
of the D, B1 and B2 channels. AAL2 Loopback is also supported
on a per sub-channel basis. In order to run these tests, the
CO-IWF must first set the value of this object appropriate to
the test that needs to be run. The CO-IWF should then set the
value of ifAdminStatus in the corresponding ifEntry to 'testing'.
The CO-IWF should verify that the test is in progress by checking
that the value of ifOperStatus in the corresponding ifEntry is
equal to 'testing'. Once testing is complete the CO-IWF must set
the ifAdminStatus to a value other than 'testing'.
Note that the LES device must not allow a CO-IWF to manipulate
the ifAdminStatus of physical user ports that do not belong to
its managed CP-IWF."
|
|
|
|
